Painter's Buddy Skim Coat

  • $32.50

PIONEER PRO Painter’s Buddy Skim Coat is a cement-based finishing plaster consisting of finely crushed white marble and high-grade sand aggregates of consistent quality and composition.

Pack size: 20kg bag





  • Excellent adhesion & good bonding strength
  • Non-sag, non-cracking, & non-combustible
  • Easy to mix and use



For finishing plaster on:

    • Precast
    • Concrete
    • Fiber cement board
    • Gypsum board



For preparation of substrate, make sure that the surface is clean, dry, free of impurities and uncontaminated by oil or grease.
Wet the substrate prior to application. Avoid water accumulation on the surface.
Method of Application
Mix Pioneer Pro Skim Coat with clean water at the site by means of a mechanical mixing device. Prepare the required water in a suitable container and then add the Skim Coat while stirring continuously until a smooth and creamy consistency is obtained. The mixture can be applied immediately after mixing.
Level off the coat to a smooth finish using a finishing trowel. Once the Skim Coat has dried, a final coat of paint can be applied.