GESS water-tite 100

Flash Setting Water Plug; Water-Tite 100

  • $62.00
  • Save $12

QuickCrete 100 is a flash setting  high strength mortar, designed to repair teh concrete very fast. Ideal for use in patching concrete mortars, repairing concrete pipe and precast concrete, repairing honeycombs, crack and spalling, anchoring of bolts and fixtures, repairing water retaining structures, and filling holes.



  • With shelf life of 12 months if kept unopened
  • Considered an Instant Plug of leaks in concrete structures. 



  • Setting time: 45 to 90 seconds at 30 deg C
  • Curing:  Standard concrete procedures should be followed to prevent rapid water loss and consequent loss of strength.



  1. For surface preparation, surfaces should be brushed clean to remove loose material, dust and laitance, 
  2. Areas to be patched should be cut back to a depth of 20mm and given a good mechanical key.  Feather edges must not be allowed.
  3. All surfaces must be damped with clean water prior to application.
  4. Mixing proportion is 1 part water to 3 parts QuickCrete 100.  
  5. Apply mixed QuickCrete in place ensuring maximum contact with substrate.  If being used to plug a running water leak, should be held in place until it reaches initial set time.
  6. Due to rapid setting, use only the quantity which can be placed within the prescribed time.