News

Anchoring Adhesives Installation

Posted by Pedram Mojarrad on

  Installing procedure when using Epoxymix Construction, Fastcure, Ultra, Rapid & Underwater products with anchors etc; into concrete and other solid masonry Steps: 1.Drill hole to correct diameter and depth as specified for your anchor. Diamond core drill holes should be roughened prior to injection of Epoxymix2.Clean holes with wire brush, this procedure is very important and any residue left in the hole will prevent Epoxymix bonding with the substrate3.Attach nozzle to cartridge and discard the first 100mm of Epoxymix until the mix is in a solid colour.4.Inject from the base of the hole, withdrawing as the hole fills up to ½...

Read more →

How to repair a damaged concrete?

Posted by Pedram Mojarrad on

Concrete repair is not necessarily an easy job to do, due to different types and sizes of the damage and also possible causes of that. However, in this article, we explain a simple methodology of repairing concrete with minor damages and domestic applications. For more information on the possible causes of the concrete deterioration & cracks and how to repair them, you may consult with "HB 84-2006 Guide to Concrete Repair and Protection", Standards Australia. Epoxy-based mortars and crack fillers are the most durable and high performance products for small size repairs and crack filling. Note that epoxy-based repair might not be the best option for large scale...

Read more →

Structural Epoxy Adhesives

Posted by Pedram Mojarrad on

Epoxy adhesives are the best performing glues and adhesives in construction.

Read more →